BELMONT METALS INC -- LEAD  -- 3439-00N084991
<pre>=====================  Product Identification  =====================

Product ID:LEAD
MSDS Date:08/03/1989
FSC:3439
NIIN:00N084991
=== Responsible Party ===
Company Name:BELMONT METALS INC
Address:330 BELMONT AVE
City:BROOKLYN
State:NY
ZIP:11207
Country:US
Info Phone Num:718-342-4900
Emergency Phone Num:718-342-4900
Preparer's Name:BRUCE N REED
CAGE:70774
=== Contractor Identification ===
Company Name:BELMONT METALS INC
Address:330 BELMONT AVE
Box:City:BROOKLYN
State:NY
ZIP:11207
Phone:718-342-4900
CAGE:70774

=============  Composition/Information on Ingredients  =============

Ingred Name:LEAD (SARA 313) (CERCLA)
CAS:7439-92-1
RTECS #:OF7525000
Fraction by Wt: 99.99%
OSHA PEL:SEE 1910.1025
ACGIH TLV:0.15 MG/M3 DUST
EPA Rpt Qty:1 LB
DOT Rpt Qty:1 LB

=====================  Hazards Identification  =====================

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES  Skin:YES  Ingestion:YES
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:ACUTE: INHAL: LEAD INTOXICATION MAY
    RESULT FROM CHRONIC HIGH LEAD EXPOSURES W/SYMPS OF ANEMIA,
    INSOMNIA, WEAK, CONSTIPATION & GI DISORDER. INGESTION OF LEAD MAY
    CAUSE LEAD INTOXICATION W/ACCOMPANYING  SYMPS OF NAUS & ABDOM PAIN.
    EYE: MECH IRRIT. SKIN: POSS MECH IRRIT OF SKIN. SIGNS & SYMPS ASSOC
    W/EXPOS(EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:HLTH HAZ: OVER TLV: DISEASES OF BLOOD & BLOOD
    FORMING ORGANS, KIDNEYS, NERV & POSSIBLY REPRODUCTIVE SYSTEMS. LEAD
    APPEARS ON THE NAVY LISTING OF OCCUP CHEM REPROD HAZARDS. SEEK
    CONSULTATION FROM APPRO P HLTH PROFESSIONALS CONCERNING LATEST
    HAZARD LIST INFO & SAFE HNDLG & EXPOS INFO .
Medical Cond Aggravated by Exposure:NOT APPLICABLE.

=======================  First Aid Measures  =======================

First Aid:INHAL: REMOVE FROM EXPOSURE. GET IMMEDIATE MEDICAL ATTENTION.
    INGEST: GET IMMEDIATE MEDICAL ATTENTION. EYE CONT: FLUSH WITH
    COPIOUS QUANTITIES OF WATER FOR @ LST 15 MINS. GET IMMEDIATE
    MEDICAL ATTENTI ON. SKIN CONT: WASH THOROUGHLY WITH SOAP AND WATER.

=====================  Fire Fighting Measures  =====================

Flash Point:NON FLAMMABLE
Extinguishing Media:CHEMICAL OR CARBON DIOXIDE SHOULD BE USED ON
    SURROUNDING FIRE. DO NOT USE WATER ON FIRES WHERE MOLTEN METAL IS
    PRESENT.
Fire Fighting Procedures:WEAR NIOSH APPROVED SCBA & FULL PROTECTIVE
    EQUIPMENT .
Unusual Fire/Explosion Hazard:MOLTEN METALS PRODUCE FUME, VAPOR AND/OR
    DUST THAT MAY BE TOXIC AND OR RESPIRATORY IRRITANTS. WILL REACT
    WITH STRONG OXIDIZERS.

==================  Accidental Release Measures  ==================

Spill Release Procedures:DUST MATERIAL SHOULD BE VACUUMED OR WET SWEPT
    WHERE VACUUMING IS NOT FEASIBLE. PARTICULATE MATTER SHOULD BE
    STORED IN DRY CONTAINERS FOR LATER DISPOSAL. DO NOT USE COMPRESSED
    AIR OR DRY SWEEPING AS A  MEANS OF CLEANING.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

======================	Handling and Storage  ======================

Handling and Storage Precautions:NONE SPECIFIED BY MANUFACTURER.
Other Precautions:NONE SPECIFIED BY MANUFACTURER.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:NIOSH APPROVED RESPIRATOR.
Ventilation:NONE SPECIFIED BY MANUFACTURER.
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:ANSI APPRVD CHEM WORKERS GOGGLES .
Other Protective Equipment:ANSI APPRVD EYE WASH & DELUGE SHOWER .
    COVERALLS OR FULL BODY CLOTHING SHOULD BE WORN DURING PROD & USE
    (SUPDAT)
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
OTHER PROT EQUIP: AND PROPERLY LAUNDERED AFTER USE.

==================  Physical/Chemical Properties  ==================

Melt/Freeze Pt:M.P/F.P Text:631F,333C
Spec Gravity:11.34
Solubility in Water:INSOLUBLE
Appearance and Odor:SILVERY GRAY METALLIC. NO ODOR.

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
STRONG OXIDZERS AND THIS PRODUCT MAY LIBERATE HYDROGEN GAS.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:HIGH TEMPERATURES MAY PRODUCE HEAVY
    METAL FUME, VAPOR AND OR DUST.

====================  Disposal Considerations  ====================

Waste Disposal Methods:DISPOSE OF TOXIC SUBSTANCES IN ACCORDANCE WITH
    FEDERAL, STATE AND LOCAL REGUALTIONS.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.