HILTI INC -- SPRAY LUBRICANT  -- 9150-01-186-7334
<pre>=====================  Product Identification  =====================

Product ID:SPRAY LUBRICANT
MSDS Date:07/31/1995
FSC:9150
NIIN:01-186-7334
=== Responsible Party ===
Company Name:HILTI INC
Box:21148
City:TULSA
State:OK
ZIP:74121
Country:US
Info Phone Num:918-879-6000
Emergency Phone Num:800-879-4444
Preparer's Name:PAUL STEGER
CAGE:EO264
=== Contractor Identification ===
Company Name:HILTI INC
Address:5400 S 122ND E AVE
Box:21148
City:TULSA
State:OK
ZIP:74121
Country:US
Phone:918-252-6000/800--879-6000
CAGE:11239
Company Name:HILTI INC
Address:5400 S 122ND EAST AVE
Box:21148
City:TULSA
State:OK
ZIP:74121
Country:US
Phone:918-252-6000/800-879-6000
CAGE:EO264

=============  Composition/Information on Ingredients  =============

Ingred Name:KEROSENE
CAS:8008-20-6
RTECS #:OA5500000

Ingred Name:MINERAL OILS
OSHA PEL:5 MG/M3 (MFR)
ACGIH TLV:5 MG/M3 (MFR)

=====================  Hazards Identification  =====================

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:NO	Skin:YES  Ingestion:NO
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:NONE ANTICIPATED. PROLONGED AND
    REPEATED CONTACT WITH THE SKIN CAN LEAD TO IRRITATION AND POSSIBLY
    DERMATITIS. SIGNS AND SYMPTOMS:NONE NORMALLY ENCOUNTERED. EXCESSIVE
    EXPOSURE CAN BE IRRITATING TO THE  EYES, MUCOUS MEMBRANES, AND
    UPPER RESPIRATORY TRACT.
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:EYE AND SKIN CONDITIONS.

=======================  First Aid Measures  =======================

First Aid:EYES:FLUSH WITH PLENTY OF WATER FOR AT LEAST 15 MINUTES.
    SKIN:WASH WITH SOAP AND WATER. LAUNDER CONTAMINATED CLOTHING BEFORE
    REUSE. INHALATION:MOVE TO FRESH AIR. INGEST:GIVE PLENTY OF WATER TO
    DRINK.  NEVER GIVE ANYTHING BY MOUTH TO AN UNCON PERSON. DO NOT
    INDUCE VOMITING UNLESS DIRECTED BY MD. CALL MD IMMED.
    OTHER:REFERRAL TO MD IS REC IF THERE IS ANY QUESTION ABOUT
    SERIOUSNESS OF INJURY/EXPOS.

=====================  Fire Fighting Measures  =====================

Flash Point Method:PMCC
Flash Point:148F,64C
Extinguishing Media:CO*2, DRY CHEMICAL, FOAM, WATER.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA & FULL
    PROTECTIVE EQUIPMENT . NONE KNOWN.
Unusual Fire/Explosion Hazard:COMBUSTIBLE LIQUID. THERMAL DECOMPOSITION
    PRODUCTS CAN BE FORMED. SEE HAZARDOUS DECOMPOSITION PRODUCTS.

==================  Accidental Release Measures  ==================

Spill Release Procedures:REMOVE ALL SOURCES OF IGNITION. ABSORB WITH
    TOWEL, RAGS, ETC, AND PLACE IN A CLOSED CONTAINER FOR PROPER
    DISPOSAL. KEEP AWAY FROM SANITARY SEWERS AND OTHER WATERWAYS.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

======================	Handling and Storage  ======================

Handling and Storage Precautions:COMBUSTIBLE. KEEP AWAY FROM IGNITION
    SOURCES. STORE IN A COOL, DRY PLACE AND AWAY FROM OXIDIZING AGENTS.
Other Precautions:AVOID PROLONGED OR REPEATED CONTACT WITH THE EYES,
    SKIN AND CLOTHING. KEEP OUT OF THE REACH OF CHILDREN.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:USE NIOSH/MSHA APPROVED RESPIRATOR APPROPRIATE
    FOR EXPOSURE OF CONCERN . NONE NORMALLY REQUIRED.
Ventilation:GENERAL (NATURAL OR MECHANICALLY INDUCED FRESH AIR
    MOVEMENTS THAT MAINTAIN VAPOR CONCENTRATIONS BELOW REC EXPOS LIMS).
Protective Gloves:COTTON GLOVES REC WHEN CLEANING TOOLS.
Eye Protection:ANSI APPROVED CHEM WORKERS GOGGS .
Other Protective Equipment:ANSI APPROVED EMERGENCY EYE WASH AND DELUGE
    SHOWER .
Work Hygienic Practices:WASH THOROUGHLY AFTER HANDLING.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.

==================  Physical/Chemical Properties  ==================

Boiling Pt:B.P. Text:>95F,>35C
Vapor Pres:5.1
Vapor Density:>1
Spec Gravity:0.84
Evaporation Rate &amp; Reference:<1
Solubility in Water:<0.1%
Appearance and Odor:AMBER LIQUID. KEROSENE ODOR.

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
STRONG ACIDS AND OXIDIZING AGENTS.
Stability Condition to Avoid:EXPOSURE TO OXIDIZING MATERIALS AND TO
    FIRE CONDITIONS.
Hazardous Decomposition Products:THERMAL DECOMPOSITION CAN YIELD CO AND
    CO*2.

====================  Disposal Considerations  ====================

Waste Disposal Methods:CONSULT WITH REGULATORY AGENCIES OR CORPORATE
    PERSONNEL FOR DISPOSAL METHODS THAT COMPLY WITH LOCAL, STATE AND
    FEDERAL HEALTH AND ENVIRONMENTAL REGULATIONS.

 ======================================================================
 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.