DIAMANT METALLPLASTIC GMBH -- RESIN  -- 8040-00N021107
<pre>=====================  Product Identification  =====================

Product ID:RESIN
MSDS Date:10/01/1987
FSC:8040
NIIN:00N021107
Kit Part:Y
=== Responsible Party ===
Company Name:DIAMANT METALLPLASTIC GMBH
Address:12 HONTZLARSTR
City:D 4050 MOENCHENGLADBACH 2 WEST GERMANY
Info Phone Num:02166-86002
Emergency Phone Num:02166-86002
CAGE:DIAMA
=== Contractor Identification ===
Company Name:DIAMANT METALLPLASTIC GMBH
Address:12 HONTZLARSTR
Box:City:D 4050 MOENCHENGLADBACH 2 WEST GERMANY
Phone:02166-86002
CAGE:DIAMA

=============  Composition/Information on Ingredients  =============

Ingred Name:SILICA GEL
CAS:112945-52-5
RTECS #:VV7310000
ACGIH TLV:20 MPPCF (MFR)

Ingred Name:TALC (POWDER), CONTAINING NO ASBESTOS FIBERS; (TALCUM)
CAS:14807-96-6
RTECS #:WW2710000
OSHA PEL:2 MG/M3 RDUST
ACGIH TLV:2 MG/M3 RDUST

Ingred Name:MOLYBDENUM SULFIDE; (MOLYBDENUM DISULFIDE)
CAS:1317-33-5
RTECS #:QA4697000
OSHA PEL:10 MG(MO)/M3
ACGIH TLV:10 MG(MO)/M3

Ingred Name:EPOXY RESIN; EPICHLOROHYDRIN BISPHENOL A TYPE; (MIXTURE OF
    EPOXY RESINS, BISPHENOL A)

=====================  Hazards Identification  =====================

LD50 LC50 Mixture:LD50 (ORAL,RAT): >5000 MG/KG.
Routes of Entry: Inhalation:YES  Skin:NO  Ingestion:YES
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:MODERATE SKIN IRRITATION. PROLONGED,
    REPEATED, UNPROTECTED SKIN CONTACT CAN CAUSE IRRITATION OR
    SENSITIZATION. CORNEAL EYE INJURY UNLIKELY.
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

=======================  First Aid Measures  =======================

First Aid:EYES: IRRIGATE WITH WATER FOR AT LEAST 15 MINUTES, GET
    MEDICAL ATTENTION. INHALATION: IN CASE OF PROBLEMS GET TO FRESH
    AIR, GET MEDICAL ATTENTION. INGESTION: IN CASE LARGER AMOUNTS WERE
    SWALLOWED: IND UCE VOMITING, GET MEDICAL ATTENTION. SKIN: WASH OFF
    WITH WATER AND SOAP, CHANGE SOILED CLOTHING.

=====================  Fire Fighting Measures  =====================

Flash Point:>392F,>200C
Extinguishing Media:H2O MIST, CO2, FOAM.
Fire Fighting Procedures:USE NIOSH/MSHA APPROVED SCBA AND FULL
    PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:NONE KNOWN.

==================  Accidental Release Measures  ==================

Spill Release Procedures:WIPE UP WITH PAPER TOWELS OR ABSORBENT
    MATERIALS (SKIN PROTECTION) AND DISCARD.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

======================	Handling and Storage  ======================

Handling and Storage Precautions:AVOID SKIN CONTACT.
Other Precautions:NONE SPECIFIED BY MANUFACTURER.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:NONE UNDER NORMAL CONDITIONS. USE NIOSH/MSHA
    APPROVED RESPIRATOR APPROPRIATE FOR EXPOSURE OF CONCERN .
Ventilation:LOCAL EXHAUST PREFERABLE IF AVAILABLE. MECHANICAL
    ACCEPTABLE, IF AVAILABLE.
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:CLOTHING WITH LONG LEGS AND SLEEVES.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.

==================  Physical/Chemical Properties  ==================

HCC:N1
Boiling Pt:B.P. Text:>752F,>400C
Vapor Pres:<0.01
Spec Gravity:1.3-1.9
Solubility in Water:NO
Appearance and Odor:VISCOUS TO PASTE-LIKE (TYPE DEPDG); DARK
    APPEARANCE.

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
STRONG BASES AND ACIDS.
Stability Condition to Avoid:TOO HIGH AMOUNTS OF AMINES.
Hazardous Decomposition Products:CO & CO2 ON BURNING.
Conditions to Avoid Polymerization:TOO HIGH AMOUNTS OF AMINES.

====================  Disposal Considerations  ====================

Waste Disposal Methods:DISPOSAL METHODS BASED ON FEDERAL, STATE AND
    LOCAL REGULATIONS.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.